Water Seperator

 

• Water Seperator to be used in conjunction to the SKV side channel compressor
• The connected condenser pulls the sucked air/water (e.g. out of the insulation layer ) through the water separator.
• By its construction, water is collected inside the separator, until the level-regulator switches off the SKV and sets the water pump into operation, which then pumps the water out of the separator via a water drain. As soon as the water level drops below approximately 1 cm in height, the condenser is switched on again and operates until the next pump procedure
• Its housing is made of stainless steel
   

  Technical data and dimensions	WAS
  Max. flow rate of the pump (l/min) Delivery height 1 m Delivery height 2 m Delivery height 3 m Delivery height 4 m	138 120   84   45
  Connections	2x coagulant 3x intake
  Electricity (V/Hz)	230 / 50
  Electrical supply	0,3 KW / 1,3 A / IP 42
  Dimmensions l x w x h (mm)	450x390x600
  Weight (kg)	27,5

.

[Download Brochure]